21
edits
Changes
Jump to navigation
Jump to search
Created page with "== Overview == HP Tuners allows the end user to edit the calibration tables in their ECU. You are provided a stock file when you first connect to a controller. <br>HP Tuners l..."
== Overview ==
HP Tuners allows the end user to edit the calibration tables in their ECU. You are provided a stock file when you first connect to a controller.
<br>HP Tuners launched support for the Simos 18 in September of 2020. As of writing HP Tuners officially supports:
* 2013-2019 Golf GTI and Golf R 2.0 TFSI
* 2013-2019 Audi A3 and Audi S3 2.0 TFSI
* DQ250_0D9 6 Speed Dual Clutch Transmission
* DQ250_02E 6 Speed Dual Clutch Transmission
A 2017 Golf Sportwagen 1.8 TFSI has been successfully licensed and flashed, but is not listed on the HP Tuners support vehicles page.
== Cost ==
HP Tuners purchase an MPVI2 cable starting at $299.99 and load the device with credits costing $50 each. Credits are spent the first time the user attempts to write a new controller and are locked to one specific controller by serial number. The controllers listed above cost 4 credits each.
== Datalogging ==
While HP Tuners provides a datalogging component, it currently lacks loggable parameters that would make tuning a non-factory turbo possible.
== User Defined Parameters ==
HP Tuners allows loading of a TunerPro .xdf file in order to edit tables and parameters that are not in the definition provided by HP Tuners. Definitions are specific to a controller’s software version so a definition file for the specific vehicle being worked on are extremely helpful. Enabling user defined parameters is an additional feature that costs $179.99. This is licensed to an MPVI2 cable and can be used on multiple controllers.
<br> TunerPro Website: [http://tunerpro.net tunerpro.net]
HP Tuners allows the end user to edit the calibration tables in their ECU. You are provided a stock file when you first connect to a controller.
<br>HP Tuners launched support for the Simos 18 in September of 2020. As of writing HP Tuners officially supports:
* 2013-2019 Golf GTI and Golf R 2.0 TFSI
* 2013-2019 Audi A3 and Audi S3 2.0 TFSI
* DQ250_0D9 6 Speed Dual Clutch Transmission
* DQ250_02E 6 Speed Dual Clutch Transmission
A 2017 Golf Sportwagen 1.8 TFSI has been successfully licensed and flashed, but is not listed on the HP Tuners support vehicles page.
== Cost ==
HP Tuners purchase an MPVI2 cable starting at $299.99 and load the device with credits costing $50 each. Credits are spent the first time the user attempts to write a new controller and are locked to one specific controller by serial number. The controllers listed above cost 4 credits each.
== Datalogging ==
While HP Tuners provides a datalogging component, it currently lacks loggable parameters that would make tuning a non-factory turbo possible.
== User Defined Parameters ==
HP Tuners allows loading of a TunerPro .xdf file in order to edit tables and parameters that are not in the definition provided by HP Tuners. Definitions are specific to a controller’s software version so a definition file for the specific vehicle being worked on are extremely helpful. Enabling user defined parameters is an additional feature that costs $179.99. This is licensed to an MPVI2 cable and can be used on multiple controllers.
<br> TunerPro Website: [http://tunerpro.net tunerpro.net]
