111
edits
Changes
Jump to navigation
Jump to search
→Getting started with a Stage X tune
= Who is it for =
[[File:Stage3.png|frameless]]
= How does it work =
#Build your tune(cal) in tunerpro
#Copy the cal to your raspberry pi
#Pre-reqs
#Checksum the cal
#Encrypt and compress the cal to prepare it for flashing
#Flash it
Directions below will assume you have a directory on your pi for the flash tool (/home/pi/VW_FLASHVW_Flash) and for your tunes (/home/pi/flashfiles/tunes)
=== Copy the cal to your raspberry pi ===
<pre>
pscp C:\somedirectory\thisismytune.bin pi@raspberrypi.local:/home/pi/flashfiles/tunes/thisismytune.bin
</pre>
=== Pre-reqs ===
<pre>
git clone https://github.com/bri3d/VW_Flash.git
cd /home/pi/VW_Flash
python3 -m pip install -r requirements.txt
cd ~/VW_Flash/lzss
make
</pre>
The fun part:
<pre>
cd /home/pi/VW_FLASHVW_Flashpython3 flashsimos18.py --file /home/pi/flashfiles/tunes/thisismytune.bin.checksummed.flashable --block CAL
</pre>
This command will use the "flashable" file to flash it to the "CAL" block on the ECU. You can also use --block by number.
= Getting started with a Stage X tune =
== Limiters ==
== Fueling ==
== Torque Request ==
