Difference between revisions of "HP Tuners"

From Simos Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by 2 users not shown)
Line 7: Line 7:
 
* DQ250_02E 6 Speed Dual Clutch Transmission
 
* DQ250_02E 6 Speed Dual Clutch Transmission
  
A 2017 Golf Sportwagen 1.8 TFSI has been successfully licensed and flashed, but is not listed on the HP Tuners support vehicles page.<br>
+
A 2017 Golf Sportwagen 1.8 TFSI has been successfully licensed and flashed, but is not listed on the HP Tuners support vehicles page.
 +
<br>
 +
<br>
 
HP Tuners Website: [http://hptuners.com hptuners.com]
 
HP Tuners Website: [http://hptuners.com hptuners.com]
  
 
== Cost ==
 
== Cost ==
HP Tuners purchase an MPVI2 cable starting at $299.99 and load the device with credits costing $50 each. Credits are spent the first time the user attempts to write a new controller and are locked to one specific controller by serial number. The controllers listed above cost 4 credits each.
+
HP Tuners users purchase an MPVI2 cable starting at $299.99 and load the device with credits costing $50 each. Credits are spent the first time the user attempts to write a new controller and are locked to one specific controller by serial number. The controllers listed above cost 4 credits each.
  
 
== Datalogging ==
 
== Datalogging ==
While HP Tuners provides a datalogging component, it currently lacks loggable parameters that would make tuning a non-factory turbo possible.
+
HP Tuners supports Mode $22 PID datalogging only at this moment.  This is a SIMOS18 ECU limitation and would require an ASW modification to allow direct memory access logging.
 +
 
 +
As of 2/21/2021, they recently added many parameters to increase the functionality of VCM Scanner.  The scanner is perfectly capable of tuning a stock-turbo setup, or possibly a mild hybrid turbo upgrade setup.
  
 
== User Defined Parameters ==
 
== User Defined Parameters ==
 
HP Tuners allows loading of a TunerPro .xdf file in order to edit tables and parameters that are not in the definition provided by HP Tuners. Definitions are specific to a controller’s software version so a definition file for the specific vehicle being worked on are extremely helpful. Enabling user defined parameters is an additional feature that costs $179.99. This is licensed to an MPVI2 cable and can be used on multiple controllers.
 
HP Tuners allows loading of a TunerPro .xdf file in order to edit tables and parameters that are not in the definition provided by HP Tuners. Definitions are specific to a controller’s software version so a definition file for the specific vehicle being worked on are extremely helpful. Enabling user defined parameters is an additional feature that costs $179.99. This is licensed to an MPVI2 cable and can be used on multiple controllers.
<br> TunerPro Website: [http://tunerpro.net tunerpro.net]
+
<br>
 +
<br>
 +
TunerPro Website: [http://tunerpro.net tunerpro.net]
 +
 
 +
== Pro Feature Set ==
 +
Standalone (no laptop) datalogging - Testing in progress.
  
 
=== See also ===
 
=== See also ===
 
* [[HP_Tuners_Tables|HP Tuners Tables Overview]]
 
* [[HP_Tuners_Tables|HP Tuners Tables Overview]]

Latest revision as of 01:29, 22 February 2021

Overview

HP Tuners allows the end user to edit the calibration tables in their ECU. You are provided a stock file when you first connect to a controller.
HP Tuners launched support for the Simos 18 in September of 2020. As of writing HP Tuners officially supports:

  • 2013-2019 Golf GTI and Golf R 2.0 TFSI
  • 2013-2019 Audi A3 and Audi S3 2.0 TFSI
  • DQ250_0D9 6 Speed Dual Clutch Transmission
  • DQ250_02E 6 Speed Dual Clutch Transmission

A 2017 Golf Sportwagen 1.8 TFSI has been successfully licensed and flashed, but is not listed on the HP Tuners support vehicles page.

HP Tuners Website: hptuners.com

Cost

HP Tuners users purchase an MPVI2 cable starting at $299.99 and load the device with credits costing $50 each. Credits are spent the first time the user attempts to write a new controller and are locked to one specific controller by serial number. The controllers listed above cost 4 credits each.

Datalogging

HP Tuners supports Mode $22 PID datalogging only at this moment. This is a SIMOS18 ECU limitation and would require an ASW modification to allow direct memory access logging.

As of 2/21/2021, they recently added many parameters to increase the functionality of VCM Scanner. The scanner is perfectly capable of tuning a stock-turbo setup, or possibly a mild hybrid turbo upgrade setup.

User Defined Parameters

HP Tuners allows loading of a TunerPro .xdf file in order to edit tables and parameters that are not in the definition provided by HP Tuners. Definitions are specific to a controller’s software version so a definition file for the specific vehicle being worked on are extremely helpful. Enabling user defined parameters is an additional feature that costs $179.99. This is licensed to an MPVI2 cable and can be used on multiple controllers.

TunerPro Website: tunerpro.net

Pro Feature Set

Standalone (no laptop) datalogging - Testing in progress.

See also