44
edits
Changes
Jump to navigation
Jump to search
→Basic Lambda vs Airmass DI
=== Basic Lambda vs Airmass DI ===
This table is the ''part throttle'' fueling map. The ECU will target the entered lambda values during part throttle (not pedal position). At full throttle, the ECU will switch to the "Full Load Lambda" fueling table. <br>
The Airmass DI tables axes are defined '''INCORRECTLY''' in Maestro. When tuning the DI tables, make your changes with the below axes in mind, but do '''not''' change the axes values in Maestro:
<br>
[[File:Screen Shot 2021-01-19 at 9.30.27 PM.png]]
'''Note:''' "Full Throttle" can happen even if the accelerator pedal is not pushed completely down.
In maestro, the axes are labeled incorrectly.
The X value is *actually* `<code>fac_2_put_ad`</code>, and the Y value is *actually* `<code>fac_1_put_ad`</code>.
Calculating the difference between `<code>fac_pow_put_ctl_opl` </code> and `<code>fac_pow_put_ctl_rgl` </code> will tell you how far off your wgdc table is from your actual wastegate control.
